Thin Metal Film Physical Vapor Deposition System
Loading...
Date
2023-05-10
Authors
Bowman, Matthew D.
Journal Title
Journal ISSN
Volume Title
Publisher
Houghton University
Abstract
A low-cost, thin film deposition system utilizing physical vapor deposition is being constructed at Houghton University. A mechanical pump and turbomolecular pump lower the chamber to a base pressure of 10−6 Torr. Three graphite crucibles are heated via thermionic emission from three corresponding tungsten filaments. Each filament floats at up to -4 kV with individually controlled currents of up to 3 A. The use of three separate crucibles and filaments allows for the deposition of up to three different materials either simultaneously or sequentially. The 10 cm Si substrate onto which the metals are deposited is mounted on a rotatable feedthrough behind a stepper motor-controlled linear shutter, which provides a method for depositing with a thickness gradient. A Giedd and Perkins evaporation rate monitor allows controlled deposition. The chamber is currently capable of producing films and is being retrofitted to use an Arduino to control the deposition process more easily.
Description
Event
Keywords
Student Projects
Citation
Collections
Rights
Authors retain the copyright for all content posted in this repository. This material may not be published, reproduced, broadcast, rewritten, or redistributed beyond the Houghton University community without permission except in accordance with fair use doctrine.