Automatic Control of an Inertial Electrostatic Confinement Device
Condie, Micah K.
Yuly, Mark E.
The Houghton University Farnsworth-Hirsch fusor is an inertial electrostatic confinement device designed for the purpose of studying plasmas, D-D fusion, and as a source of x-rays and neutrons for other experiments. It operates via two concentrically arranged wire spheres with a voltage difference between them of up to 30 kV, ionizing a low-pressure gas to form and confine a plasma. The voltage across the two spheres is measured using a voltage divider circuit allowing the Arduino at the bottom of the chain to measure a lower proportional voltage. The current to the HV grid flows through an LED, floating at high voltage, the light from which is then measured at the end of a fiber optic cable using a phototransistor circuit. The previous fusor remote operating system used LabVIEW and Digi TS4 Port servers to communicate with the high voltage power supply, pressure gauge, and mass-flow controller via ethernet, RS-232, and RS-485. It was redesigned using python to communicate with the instrumentation directly over USB and RS-485. Furthermore, a PID controller was made so that the pressure in the chamber could be adjusted automatically, maintaining the plasma while raising the voltage. The fusor was successfully tested using air as the ionized gas with limited success using the PID controller. Future experiments will correct the automatic system and test the system with hydrogen then deuterium.
XLI Annual Rochester Symposium for Physics Students, University of Rochester (Rochester, NY), April 15, 2023
Authors retain the copyright for all content posted in this repository. This material may not be published, reproduced, broadcast, rewritten, or redistributed beyond the Houghton College community without permission except in accordance with fair use doctrine.